32 found, showing page 1 of 3
Simpson Strong-Tie A21 Angle, 2 in W, 1-1/2 in D, 1-3/8 in H, Steel, Galvanized/Zinc
PRODUCT OVERVIEW
Our line of angles provides a way to make a wide range of 90 deg connections.
Product Details
Depth:1-1/2 in
Fastener Type:Nail
Finish:Galvanized/Zinc
Material:Steel
Material Thickness:18 ga
Width:2
Features
Versatile connector for various 90 deg connections and home repair projects Stronger than angled nailing or screw fastening alone
Help ensure joints are consistently straight and strong
Made from 12 ga steel
Galvanized (G90) for extra corrosion resistance
View Details
$0.90
Simpson Strong-Tie A23 Angle, 2-3/4 in L, Steel, Galvanized/Zinc
PRODUCT OVERVIEW
Our line of angles provides a way to make a wide range of 90 deg connections.
Product Details
Finish:Galvanized/Zinc
Length:2-3/4
Material:Steel
Material Gauge:18 ga
Features
Versatile connector for various 90 deg connections and home repair projects Easier than through-bolting
Help ensure joints are consistently straight and strong
Galvanized (G90) for extra corrosion resistance
View Details
$0.99
Simpson Strong-Tie A35 Framing Angle, 1-7/16 in W, 4-1/2 in D, Steel, Galvanized/Zinc
PRODUCT OVERVIEW
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
Product Details
Depth:4-1/2 in
Fastener Type:Nail
Finish:Galvanized/Zinc
Material:Steel
Material Thickness:18 ga
Width:1-7/16
Features
Versatile connector for various 90 deg connections and home repair projects Stronger than angled nailing or screw fastening alone
Help ensure joints are consistently straight and strong
Made from 12 ga steel
Galvanized (G90) for extra corrosion resistance
Load-rated for wind and seismic forces
Suitable for both new and retrofit applications
View Details
$0.89
Simpson Strong-Tie ABW ABW44Z Post Base, 4 x 4 in Post, 16 ga Gauge, Steel, ZMAX
PRODUCT OVERVIEW
The AB Series of retrofit adjustable post-bases provide a 1 in stand-off for the post, are slotted for adjustability and can be installed with nails, Strong-Drive(R) SD connector screws or bolts (ABU). Depending on the application needs, these adjustable stand-off post-bases are designed for versatility, cost-effectiveness and maximum uplift performance.
Product Details
Finish:ZMAX
Length:3-9/16
Material:Steel
Material Gauge:16 ga
Post Size:4 x 4 in
Weight Capacity:1005 lb Uplift 7180 lb Down DF/SP
Width:3-9/16
Features
Slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
1 in stand-off helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash
Attaches a post to existing concrete for decks, patio covers and other top-supported structures
Features 1 in stand-off to help prevent rot at post-end slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
View Details
$20.45
Simpson Strong-Tie ABW Series ABW66Z Post Base, 1190 lb Uplift, 12,935 lb Down DF/SP, 6 x 6 in Post,
PRODUCT OVERVIEW
The AB Series of retrofit adjustable post-bases provide a 1 in stand-off for the post, are slotted for adjustability and can be installed with nails, Strong-Drive(R) SD connector screws or bolts (ABU). Depending on the application needs, these adjustable stand-off post-bases are designed for versatility, cost-effectiveness and maximum uplift performance.
Catalog
Product Details
Finish:ZMAX
Length:5-9/16
Material:Steel
Material Gauge:12 ga
Post Size:6 x 6 in
Weight Capacity:1190 lb Uplift 12935 lb Down DF/SP
Width:5-1/2
Features
Slot in the base enables flexible positioning around the anchor bolt, making precise post placement easier
1 in stand-off helps prevent rot at the end of the post and meets code requirements for structural posts installed in basements or exposed to weather or water splash
Attaches a post to existing concrete for decks, patio covers and other top-supported structures
Features 1 in stand-off to help prevent rot at post-end slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
View Details
$41.89
Simpson Strong-Tie BC BC40Z Post Base, 4 x 4 in Post, Steel, ZMAX
PRODUCT OVERVIEW
The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
Product Details
Finish:ZMAX
Length:3-1/4
Material:Steel
Post Size:4 x 4 in
Weight Capacity:510 lb Uplift 735 lb Lateral
Width:3-9/16
Features
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Opposing nail pattern to reduce wood splitting
Attains full allowable load using either common nail or pneumatic nail sizes
View Details
$6.75
Simpson Strong-Tie BC Series BC4Z-R Post Cap, Steel, ZMAX, 1/PK
PRODUCT OVERVIEW
The BC post cap is designed to connect a beam to a post. The 18 ga material of this post cap makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
Product Details
Fastener Type:Nail
Finish:ZMAX
Length:2-7/8
Material:Steel
Nail Diameter:0.162 in
Width:3-9/16
Features
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Opposing flanges provide increased lateral resistance
Attains full allowable load using either common nail or pneumatic nail
sizes
Do not install bolts into pilot holes
Install with 0.162 x 3-1/2 in nails or 0.162 x 2-1/2 in nails
View Details
$12.09
USP Mitek 5-in X 2-in 16-gauge Galvanized Wood-to-wood Protection Plate
Overview:
This USP 5-inch by 2-inch 16-gauge galvanized wood-to-wood protection plate is designed to provide superior strength and durability for your construction projects. Ideal for reinforcing joints and connections, this protection plate is perfect for both residential and commercial applications. Its galvanized finish ensures resistance to corrosion, making it suitable for outdoor use as well.
Key Features:
- Dimensions: 5 inches by 2 inches
- Material: 16-gauge galvanized steel
- Provides excellent reinforcement for wood connections
- Corrosion-resistant finish for long-lasting durability
- Easy to install with standard fasteners
- Ideal for use in framing, decking, and other structural applications
- Designed to enhance the strength of wood-to-wood connections
Use Cases:
This protection plate is perfect for builders and DIY enthusiasts looking to enhance the structural integrity of their projects. Whether you are constructing a deck, framing a house, or making repairs, this galvanized protection plate will ensure that your wood connections remain strong and secure over time.
View Details
$0.99
Simpson Strong-Tie H1A Hurricane Tie, 5-1/4 in L, 5-1/4 in W, Steel, Galvanized
PRODUCT OVERVIEW
The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.
Product Details
Applicable Material:Wood
Color:Silver
Depth:0.81 in
Finish:Galvanized
Length:5-1/4
Material:Steel
Material Gauge:18 ga
Width:5-1/4
Features
Holds the rafter or truss on both sides for high-lateral load resistance
Can be installed on inside or outside of wall or both sides
Can be installed with flanges facing either inward or outward
Provides faster installation than using two single-sided ties
Galvanized (G90) for extra corrosion resistance
Hurricane ties do not replace solid blocking
When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind
View Details
$0.99
Simpson Strong-Tie H2.5A Hurricane Tie, Silver, 6 in L, 1-3/8 in W, Steel, Galvanized, Fastening Met
PRODUCT OVERVIEW
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
Product Details
Color:Silver
Fastening Method:Nail
Finish:Galvanized
Length:6
Material:Steel
Material Gauge:18 ga
Resists:Seismic Force Wind
Width:1-3/8
Features
Embossments in bend line strengthen connection
The top-flange features an arrow line indicator to aid correct installation Galvanized (G90) for extra corrosion resistance
Hurricane ties do not replace solid blocking
When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind
View Details
$0.90
Simpson Strong-Tie LSTA LSTA12 Light Strap Tie, 12 in L, 1-1/4 in W, Steel, Galvanized, Fastening Me
PRODUCT OVERVIEW
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
Product Details
Color:Silver
Fastening Method:Nail
Finish:Galvanized
Length:12
Material:Steel
Material Gauge:20 ga
Number of Fixings:10
Resists:Corrosion
Width:1-1/4
Features
Load-rated, precut strap designed for quick installation and optimal performance
Designed to resist wind and seismic forces
Floor-to-floor clear span application
Galvanized (G90) for extra corrosion resistance
View Details
$1.75
Simpson Strong-Tie LSTA Series LSTA9 Strap Tie, 9 in L x 1-1/4 in W Dimensions, 20 ga, Steel, Galvan
PRODUCT OVERVIEW
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
Product Details
Dimensions:9 in L x 1-1/4 in W
Fasteners:Screw
Finish:Galvanized/Zinc
Material:Steel
Material Gauge:20 ga
Features
Load-rated, precut strap designed for quick installation and optimal performance
Designed to resist wind and seismic forces
Floor-to-floor clear span application
Galvanized (G90) for extra corrosion resistance
View Details
$1.45
Simpson Strong-Tie LU LU210 Joist Hanger, 7-13/16 in H, 1-1/2 in D, 1-9/16 in W, 2 x 10 in, Steel, G
PRODUCT OVERVIEW
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
Product Details
Depth:1-1/2 in
Fastener Type:Screw
Finish:Galvanized/Zinc
Material:Steel
Mounting Type:Face
Size:2 x 10 in
Width:1-9/16
Features
LU series hangers are tested, load-rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Made from 20 ga steel
Galvanized (G90) for extra corrosion resistance
View Details
$1.39
Simpson Strong-Tie LU LU24 Joist Hanger, 3-1/8 in H, 1-1/2 in D, 1-9/16 in W, 2 x 4 in, Steel, Galva
PRODUCT OVERVIEW
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
Product Details
Depth:1-1/2 in
Fastener Type:Screw
Finish:Galvanized/Zinc
Material:Steel
Mounting Type:Face
Size:2 x 4 in
Width:1-9/16
Features
LU series hangers are tested, load-rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Made from 20 ga steel
Galvanized (G90) for extra corrosion resistance
View Details
$0.78
Simpson Strong-Tie LU LU26 Joist Hanger, 4-3/4 in H, 1-1/2 in D, 1-9/16 in W, 2 x 6 in, Steel, Galva
PRODUCT OVERVIEW
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
Product Details
Depth:1-1/2 in
Fastener Type:Screw
Finish:Galvanized/Zinc
Material:Steel
Mounting Type:Face
Size:2 x 6 in
Width:1-9/16
Features
LU series hangers are tested, load-rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Made from 20 ga steel
Galvanized (G90) for extra corrosion resistance
View Details
$0.93
